●Mechanical part:
(1) The whole size of the major beam of the suction hoist is designed to be 2000mm, and the top phase of the center phase is welded and sealed with a plate, and the center phase is used as a vacuum accumulator. The airtightness takes a look at is carried out after welding to make certain no leakage. When the tools are abruptly powered off, it is nonetheless assured to be capable to reliably adsorb the plates for at least 20 minutes, and will no longer purpose protection accidents such as gear injury (the European CE general is to hold 10 minutes)
(2) This gear is outfitted with 6 suction cups with a diameter of 360mm for extraordinary sizes of glass. The function of every suction cup on the beam is adjustable to facilitate the adsorption of a glass of distinctive sizes.
●Electrical part:
(1) A vacuum stress change and a buzzer alarm unit are hooked up on the vacuum hoist. When the vacuum device stress does now not attain the set pressure, or when an electrical failure occurs, the alarm unit will manipulate the crimson warning mild to light up and the buzzer to sound. , Prompt the operator to deal with it in time.
●Vacuum part:
(1) The suction hoist adopts a German oil-free rotary vane vacuum pump, with a pumping capability of 8m3/h, a giant vacuum diploma of over 85%, energy-saving, compact and lightweight, no maintenance, etc.;
(2) The entire set of tools is outfitted with 6 vacuum suction cups, multi-point adsorption to make certain that the plate can keep an excessive stage throughout the coping with procedure except tilting;
(3) The suction cup fabric is nitrile rubber, with a diameter of 360mm, oil (benzene), durable, acid and alkali resistance, and can efficiently adsorb with FRP to produce a real single suction cup level. Theoretical giant suction pressure = positive location (physical product * coefficient) * calculated stress (0.6bar); (0.18*0.18*3.14)*0.6*10000=610.416, which is about 610.4Kg. According to the 4 instances security factor, the true allowable suction energy of the suction cup is 610.4/4=152.6Kg. The complete suction energy of 6 suction cups is 600kg. Note: The vacuum suction pressure cited in the above desk is calculated underneath 60% vacuum degree. Under regular working conditions, the device vacuum diploma can attain extra than 85%;
(4) The vacuum strain sensor is made of Japanese Panasonic brand, and the alarm stress degree is set to 60% vacuum;
(5) Each suction cup is geared up with a guide ball valve to manipulate the opening and closing, which ensures that the equal gear can be utilized to a number specs of plates;
(6) The higher and lower components of the sucker rod are geared up with a spring. When the plate is no longer flat, the spring acts as a buffer to make the sucker evenly stressed, so as to make sure the security and reliability of the suction cup.
● Overall:
(1) According to the European Union DIN EN 13155 vacuum machine diagram for the out of doors constructing curtain wall set up the site.
(2) Horizontal handling, electric-powered flipping, and vertical handling.
(3) Flexible design, can be utilized to the managing of exclusive sizes of ERP.